Ricoh B286 Service Manual page 449

nd
4 Fold Length: 2
This SP adjusts the operation of the fan fold sensor (R).
! If the first fold is a peak fold, this SP setting determines the length of odd
number sections.
! If the first fold is a valley fold, this SP setting determines the length of even
sections, excluding that of the first section.
Note: Adjustment in the "-" or "+" direction decreases or increases amount of
paper that feeds past the sensor. This decreases or increases the length of the
even or odd sections.
11 Margin Fold Length: 3
This SP adjusts the length of the 3
[-20 to +20/-2.5/01. mm]
Note: Adjustment in the "-" or "+" direction decreases or increases the length of
rd
the 3 section.
12 Margin Fold Length: 5
This SP adjusts the length of the 5
[-20 to +20/-3/01. mm]
Note: Adjustment in the "-" or "+" direction decreases or increases the length of
th
the 5 section.
13 Margin Fold Length: 3
This SP adjusts the length of the 3
[-20 to +20/-1.5/01. mm]
Note: Adjustment in the "-" or "+" direction decreases or increases the length of
rd
the 3 section.
14 Margin Fold Length: 3
This SP adjusts the length of the 3
[-20 to +20/-6/01. mm]
Note: Adjustment in the "-" or "+" direction decreases or increases the length of
rd
the 3 section.
SM
Fold Valley
rd
Fold: A0 SEF
rd
section when folding A0 SEF paper.
th
Fold A0 SEF
th
section when folding A0 SEF paper.
rd
Fold: A1 SEF
rd
section when folding A1 SEF paper.
rd
Fold: A2 SEF
rd
section when folding A2 SEF paper.
5-179
SP6-xxx Peripherals
B286/B289