Main Machine Final Installation; Select The Tray Paper Size And Type; Testing The Main Machine Circuit Breaker - Ricoh B286 Service Manual

1.2.3 MAIN MACHINE FINAL INSTALLATION

Select the Tray Paper Size and Type

1. Push [User Tools] > "System Settings" > "Tray Paper Settings."
Selections are shown only for installed options. If you installed all the options,
!
you will see "Tray Paper Size: Tray 1" (1
Roll), and "Tray Paper Size: Tray 3" (Cassette).
2. Select the paper size for each tray and bypass tray.
3. Select the paper type for each tray and bypass tray.

Testing the Main Machine Circuit Breaker

! Follow the procedure below to test the operation of the circuit breaker. This must
be done at installation and at least once a year after installation.
1. Plug the main machine power cord into its power source and make sure that the main
machine power is off.
Do not turn on the main machine. The main machine must be off.
!
2. Remove the rear cover [1] ("x2)
3. Use the tip of a small screwdriver to depress the breaker test button.
The breaker switch should flip from "|" to "O." This indicates that the breaker switch
!
is operating normally.
! If the breaker switch does not flip to "O", the switch must be replaced.
SM
Main Machine Installation (B286)
st
Roll), "Tray Paper Size: Tray 2" (2
1-21
nd
B286/B289