Ricoh B286 Service Manual page 515

*1: The position of the copy-exit selection lever on the rear top edge of the machine
controls where the copy feeds out.
Lever UP
The operator touches "Upper" or "Lower"
under "Copy Output Location" on the
display to select the exit shown in the
illustration above:
! Upper: Copy feeds out at "2."
! Lower: Copy feeds out at "4"
! For normal operation, the copy exit selection lever must be up, so that the operator
always has the option of selecting either "Upper" or "Lower" for copy exit.
SM
Lever DOWN
"Lower" is selected for the "Copy Output
Location," so the copy always feeds out at
"4" in the illustration above.
"Upper" cannot be selected. If the operator
selects "Upper," a message will prompt the
operator that the output destination cannot
be selected.
6-7
Overview
B286/B289