7.
Follow the instructions on the operating panel display to execute the download.
8.
Switch the main power switch off.
9.
Switch the main power switch on.
10. If the Data Overwrite Security Unit Type D (B735-18) has been installed, it must be
installed again.
11. Do SP3001 2 to initialize the ID sensor.
3.9.5 T&S POWER PACK
Remove:
!
PSU (See section 3.9.2 "PSU/Circuit Breaker")
[A] T&S power pack mounting plate (& x 2, # x 3, " x 1)
!
!
[B] T&S power pack (" x 1)
SM
3-65
Boards
B286/B289