Ricoh B286 Service Manual page 305

nd
229 2 Roll: 15000mm: Translucent Paper
nd
231 2 Roll: 297mm: Film
nd
232 2 Roll: 420mm: Film
nd
233 2 Roll: 594mm: Film
nd
234 2 Roll: 841mm: Film
nd
235 2 Roll: 1189mm: Film
nd
236 2 Roll: 2000mm: Film
nd
237 2 Roll: 3600mm: Film
nd
238 2 Roll: 6000mm: Film
nd
239 2 Roll: 15000mm: Film
1923 Paper Interval Adjustment
This SP slightly increases the gap between sheets in the paper path. When the
machine shifts to the CPM down mode, the paper is fed by whichever interval
between sheets is longer, the gap set with this SP or the gap determined by CPM
down.
[0 to 500/0/1 mm]
Note:
! The "0" (default) setting does not mean that the gap is eliminated.
! When set to "0" the standard gap between sheets is maintained (480 mm for
the B286 and 168 mm for the B289.)
1925 Cut Length Offset Correction Not Used
SM
[-100 to +100/0/ 1 mm]
[-10 to +10/0/0.1 mm]
[-20 to +20/0/1 mm]
[-30 to +30/0/1 mm]
[-100 to +100/0/ 1 mm]
5-35
SP1-xxx Feed
B286/B289