Ricoh B286 Service Manual page 397

69 Job Spool Pro to col
This SP 8etermines whether job spooling is enabled or disabled for each pro to
col. This is a 8-bit setting.
0 LPR 4
FTP
1 (Not 5
Used)
2 IPP 6
3 SMB 7
84 Setting List Print Settings List
Prints a list of the NCS parameter settings.
90 TELNET Operation Settings: TELNET (0:OFF 1:ON)
Disables or enables Telnet operation. If this SP is disabled, the Telnet port is
closed.
[0 to 1/1]
0: Disable
1: Enable
91 Web Operation Web (0:OFF 1:ON)
Disables or enables the Web operation.
[0 to 1/1]
0: Disable
1: Enable
SM
BMLinks
(Japan
Only)
DIPRINT
Reserved
(Not
Used)
Reserved
(Not
Used)
5-127
SP5-xxx Mode
B286/B289