Ricoh B286 Service Manual page 319

1944 Press FB Temp Low Temp: Special
This SP sets the low temperature used by pressure roller feedback temperature
control for Custom paper.
Note: Modes "1" to "5" below refer to the paper type and thickness settings
selected in User Tools (see "Paper Thickness Default Selection" in this section).
1 Plain: Mode1
2 Plain: Mode2
3 Plain: Mode3
4 Plain: Mode4
5 Plain: Mode5
1945 Length Level Setting
These SP's define the Length Levels for the following SP codes:
! SP1946 Press FB Stop: Target Temp Diff.
! SP1947 Press FB Stop: Time Period
1 Level 1
2 Level 2
3 Level 3
4 Level 4
5 Level 5
SM
o
[0 to 50/0/5 C]
o
[0 to 50/10/5 C]
o
[0 to 50/5/5 C]
[1000 to 15000/1300/1 mm]
[1000 to 15000/3700/1 mm]
[1000 to 15000/61001 mm]
[1000 to 15000/9100/1 mm]
[1000 to 15000/12100/1 mm]
5-49
SP1-xxx Feed
B286/B289