Ricoh B286 Service Manual page 330

SP2-xxx Drum
2403 Separation DC Current DFU
Adjusts the separation dc current. If this setting is too high, toner from the paper
will cling to the drum after transfer. The separation dc current can be set for plain
paper, translucent paper, and film for the leading edge, trailing edge, and areas
outside the image.
1 Roll Paper: Plain Paper: Img LEdge
2 Roll Paper: Plain Paper: Outside Img LEdge
3 Roll Paper: Translucent: Img LEdge
4 Roll Paper: Translucent: Outside Img LEdge
5 Roll Paper: Film: Img LEdge
6 Roll Paper: Film: Outside Img LEdge
11 Bypass: Plain Paper: Img LEdge
12 Bypass: Plain Paper: Outside Img LEdge
13 Bypass: Translucent: Img LEdge
14 Bypass: Translucent: Outside Img LEdge
15 Bypass: Film: Img LEdge
16 Bypass: Film: Outside Img LEdge
17 Cassette: Img LEdge
18 Cassette: Outside Img LEdge
B286/B289
[0.0 to -66/ -25/0.1 mA]
[0.0 to -66/ -15/0.1 mA]
[0.0 to -66/ -25/0.1 mA]
[0.0 to -66/ -15/0.1 mA]
[0.0 to -66/ -25/0.1 mA]
[0.0 to -66/ -15/0.1] mA]
[0.0 to -66/ -25/0.1 mA]
[0.0 to -66/ -25/0.1 mA]
[0.0 to -66/ -15/0.1 mA]
[0.0 to -66/ -15/0.1 mA]
[0.0 to -66/ -15/0.1 mA]
[0.0 to -66/ -15/0.1 mA]
[0.0 to -66/0/0.1 mA]
[0.0 to -66/0/0.1 mA]
5-60 SM