Ricoh B286 Service Manual page 41

User Tool System Settings> Tray Paper
Setting> Paper Type> Next>
Paper Type: Tray n
User Tool System Settings> Timer
Settings> Set Date, Set Time
Roll Feeder Installation
SP
1920 Cut Length Adjustment
Sets the cut length settings for the rolls installed in the roll feeder. These
settings are different for each machine. The settings are on a label attached
to the right side of the roll feeder drawer.
1920-111 Cut Length Adjustment: 1
Roll:297 mm:Plain Paper
1920-115 Cut Length Adjustment: 1
Roll:1189 mm:Plain Paper
1920-211 Cut Length Adjustment: 2
Roll:297 mm:Plain Paper
1920-215 Cut Length Adjustment: 2
Roll:1189 mm:Plain Paper
1001-1 Leading Edge Registration –
st
1 Roll
1001-2 Leading Edge Registration –
nd
2 Roll
1002-1 Side-to-Side Registration – 1
Roll
SM
Sets the paper type for each tray:
Tray 1: Roll 1
!
! Tray 2: Roll 2
! Tray 3: Cassette
! Bypass
Check the date and time setting. If they
are not correct, set the correct date and
time.
Adjustment
st
Adjust for B851/B852, 1
st
Adjust for B851/B852, 1
nd
Adjust for B852, 2
nd
Adjust for B852, 2
Adjust B851/B852, 1
Adjust for B852, 2
st
Adjust for B851/B852, 1
1-5
Preparation
st
Roll
st
Roll
nd
Roll
nd
Roll
st
roll.
nd
roll.
st
roll
B286/B289