Ricoh B286 Service Manual page 181

Upper unit sensor [B] (# x 1, & x 4)
4.
Gear cover plate [C] (& x 4, " x 7)
5.
6. Timing belt and cap [D]
7. Motor mount plate [E] (" x 8)
Main power switch connector [F] (& x 1, # x 1).
8.
Fusing motor [G] (# x 1, " x 4)
9.
Reinstallation
If it is not easy to connect the connector at the rear of the motor when you install the
motor mount plate:
! Remove the rear cover.
! At the left rear corner of the main machine, open two or three harness clamps to
release the motor harnesses. This will decrease the tension in the harnesses.
SM 3-53
Motors
B286/B289