Accessories; Installation; Gigabit Ethernet Board Type A (G874-01) - Ricoh B286 Service Manual

Installation of MFP Options

1.7.9 GIGABIT ETHERNET BOARD TYPE A (G874-01)

Accessories

Check the accessories and their quantities against the table below.
Description
1. Gigabit Ethernet Board
1. Ferrite Core
1. Standard USB Connector Cap
1. Standard LAN Connector Cap
To use the Gigabit Ethernet Board, SP5985-2 must be set to "1" to enable the NIC
!
and USB functions.
! When the Gigabit Ethernet Board is installed, the standard Ethernet board and
standard USB board can no longer be used. Two caps are provided to cover the
standard Ethernet and USB connectors. This prevents accidental reconnection of
the cables while the Gigabit Ethernet board is installed in the machine.
! Touch a metal surface to discharge any static electricity from your hands before
you handle the board.

Installation

! Before doing the procedure, turn off the main power switch and unplug the
machine from its power source.
1. Make sure that the machine is switched off and disconnected from its power source.
B286/B289
Qt'y
1
1
1
1
1-70 SM