Main Machine Installation (B286)
11. Reattach the hinges and fasten the lock screws removed in Step 8.
Developer
1.
Push up the buttons [1] to release the upper unit. Then open the upper unit [2].
2.
Open the toner hopper cover [3].
3.
Remove all tape and packing materials [4] in the upper unit.
4.
Slowly pull out the drum protection sheet [5].
A developer lot number is embossed on the top edge of each package. Save
!
these top edges after you open each developer package. You will need these
numbers when you enter them later with SP2801-2 and -3.
B286/B289
1-16
SM