Ricoh B286 Service Manual page 149

! To remove a paper guide, lift it a small distance and move it in the direction of
the center. Make a note of the position of each guide. Each guide must be
installed at its original position.
3. Paper guides [C] (x4)
4. Transfer wire [D]
5. Separation wires [E]
Reinstallation
! Each paper guide pair must be installed at its original position.
! For each pair, the high guide is set on the outer side and the low guide is set on the
inner side.
! If each guide is not installed at its original position, this will cause paper to wrinkle.
SM 3-21
Around the Drum
B286/B289