8 When the window reads, "Calibration Successful," press OK in the
Calibrating for Single-Ended Testing
1 Insert a Fiber SmartProbe
1RWH
TvtyrqrÃAvir
ÃTh
Q
irÃrÃhÃyhr
ÃyvtuÃ
prÃuhÃ
rv
rÃh
vtÃÃirs
rÃ
rÃ7rs
rÃphyvi
hvtÃ
ÃrvtÃvuÃvtyrqrÃsvir
Ã
irÃhyhÃprpÃurÃ
irÃ
ÃÃurÃXv
rTprÃhqÃhvÃsvrÃvr
2 Connect a duplex test jumper to the Fiber SmartProbe
3 Connect the two test jumpers to each other, using a coupler.
4 Turn on the WireScope.
5 On the Fiber Main Menu, press Calibration. The Fiber Calibration
window. The Fiber Main Menu displays. Remove the reference
jumper to start testing.
and detector.
The WireScope detects a Fiber SmartProbe
following window:
screen displays.
+
in the WireScope,.
+
, and displays the
8r
vsvtÃAvir
Ã8hiyvt
8hyvi
hvtÃurÃU rr
+
transmitter
4−7