Interfaces; Network - HEIDENHAIN GAGE-CHEK 2000 Operating Instructions Manual

Evaluation unit
Hide thumbs Also See for GAGE-CHEK 2000:
Table of Contents

Advertisement

11

Interfaces

11.4
This chapter describes settings for configuring networks, network drives, and USB
mass storage devices.
11.4.1

Network

Path:
Parameter
MAC address
DHCP
IPv4 address
IPv4 subnet mask
IPv4 standard gateway
IPv6 SLAAC
IPv6 address
IPv6 subnet prefix length
IPv6 standard gateway
Preferred DNS server
Alternative DNS server
166
Settings ► Interfaces ► Network ► X116
Contact your network administrator for the correct network settings for
configuring the product.
Explanation
Unique hardware address of the network adapter
Dynamically assigned network address of the product
Settings: ON or OFF
Default value: ON
Network address consisting of four octets
The network address is automatically assigned if DHCP is active,
or it can be entered manually
Setting range: 0.0.0.1 ... 255.255.255.255
Identifier within the network, consisting of four octets
The subnet mask is automatically assigned if DHCP is active, or
it can be entered manually.
Setting range: 0.0.0.0 ... 255.255.255.255
Network address of the router connecting a network
The network address is automatically assigned if
DHCP is active, or it can be entered manually.
Setting range: 0.0.0.1 ... 255.255.255.255
Network address with extended namespace
Only required if supported in the network
Settings: ON or OFF
Default value: OFF
Automatically assigned if IPv6 SLAAC is active
Subnet prefix in IPv6 networks
Network address of the router connecting a network
Primary server for mapping the IP address
Optional server for mapping the IP address
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018
Settings | Interfaces

Advertisement

Table of Contents
loading

Table of Contents