Table of Contents
Advertisement
3
3.5
Repackaging and storage
Repackage and store the product carefully in accordance with the conditions
stated below.
3.5.1
Repackaging the product
Repackaging should correspond to the original packaging as closely as possible.
Re-attach all mounting parts and dust protection caps to the product as
received from the factory, or repackage them in the original packaging as
received from the factory
Repackage the product in such a way that
it is protected from impact and vibration during transit
it is protected from the ingress of dust or humidity
Place all accessories that were included in the shipment in the original
packaging
Further information:
Enclose all the documentation that was included in the original packaging
Further information:
3.5.2
Storage of the product
Package the product as described above
Observe the specified ambient conditions
Further information:
Inspect the product for damage after any transport or longer storage times
32
"Items supplied and accessories", Page 28
"Storage and distribution of the documentation", Page 15
If the product is returned for repair to the Service Department:
Ship the product without accessories, without encoders and without
peripherals
"Specifications", Page 207
Transport and storage | Repackaging and storage
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 12/2018
Advertisement
Table of Contents
