22
information about the Compact Flash module. If no CF card is present, the dialog will show
None. Otherwise, volume data about the CF card is displayed.
The Eject button will cause the OIT to ignore the CF device. It will not actually eject the card
from the OIT. If the Eject button is pressed, the CF card must be removed and re-inserted
before the OIT will recognize. Note that USB devices will not be displayed.
Viewing System Information
To view system information:
1. Open the Setup Toolbar as described above, and click the System Information icon. A dialog
will be displayed with two tabs.
2. Click on the Network tab to display the current IP settings.
1010-1007, Rev 05
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual