96
Model Set tings Con fig u ra tion
1. HMI Model: Select your HMI Model.
2. Display Model: Select Portrait or landscape.
3. HMI Station No: See Controller Information Sheet for more information.
4. Port No: Assign a TCP/IP port so that another OIT can access this port. For more
information, see the "Using Remote HMIs" section.
5. Clock Source: Select internal HMI RTC or External Device.
6. Printer Type: Select type of printer.
1010-1007, Rev 05
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual