Maple Systems Silver Plus Series Installation And Operation Manual page 235

Cap turing Alarms and Events
2. Click the New... button. The Alarm Event Log Properties dialog appears.
3. Select a priority level from the drop down menu.
4. Select either bit or word from the address type drop down menu, and then select the scan time
(in millisec) from the drop-down menu.
5. Select the PLC name, device type and read address, as well as the format in the Read Address
section.
6. Click the Enable checkbox in the Notification section to have a specific bit set or cleared
when the alarm condition is reached, and the specify the condition.
231
1010-1007, Rev 05