Chapter 2 - Oit Local Setup; Factory Configuration; Calibrating The Touchscreen; Getting Into Local Setup - Maple Systems Silver Plus Series Installation And Operation Manual

OIT Lo cal Setup

Factory Configuration

Each OIT arrives from the factory with a demo project file that illustrates some of the most popular features of the
OIT. Please follow the directions enclosed in Chapter 4, Creating Your First Project, to configure your OIT for the
PLC that you are using.
The OIT also has a black reset push button and a four position DIP switch located through an access hole on the
back of the enclosure. The reset switch can be used to reinitialize the OIT if the OIT malfunctions. Only Dip
switch 1 has functionality. Dip switch 1 puts the OIT into Touch Calibration mode. For normal operation, all of
the DIP switches should be set to the OFF position.
This chapter describes how to use the Silver Plus Series' local setup options. The local setup allows touchscreen
calibration, transferring projects to and from the OIT, configuring the OIT's IP settings, passwords, time and date,
screen contrast, as well as managing the storage of recipe and history files. Additionally, memory and other system
information can be viewed.

Calibrating the Touchscreen

The touchscreen of the OIT is fully calibrated before it leaves the factory so you shouldn't need to adjust it.
However, with time the touchscreen may need to be recalibrated.
To calibrate the touchscreen:
1. Turn Dip Switch 1 ON.
2. Cycle power to the OIT.
3. After the OIT displays a crosshair cursor, you are prompted to touch the cursor for:
a. Top left position
b. Top right position
c. Bottom right position
d. Bottom left position
e. Center position.
4. The OIT will then resume initializing.

Getting into Local Setup

Accessing the local setup menus requires a USB-mouse be connected to the OIT. Using the mouse, point to the
lower right-hand corner of the OIT. The open bar icon will appear.
Click on the icon to call up the setup toolbar:
System settings
icon
Large keyboard
icon

Chapter 2 - OIT Local Setup

System info icon
Small keyboard
icon
Open/close bar
icon
Virtual keyboard
icon
1010-1007, Rev 05
17