Maple Systems Silver Plus Series Installation And Operation Manual page 91

Using EZware-5000
2. From the Edit menu, click Align, then Top or click the appropriate icon from the Manager
toolbar.
3. From the Edit menu, click Undo to put the objects back in their original position.
Using the align bottom
1. Select the objects you wish to align. For this example, select the three rectangle objects of
Window_12
2. From the Edit menu, click Align, then Bottom or click the appropriate icon from the Manager
toolbar.
3. From the Edit menu, click Undo to put the objects back in their original position.
Using the align horizontal center
1. Select the objects you wish to align. For this example, select the three rectangle objects of
Window_12.
command
command
87
1010-1007, Rev 05