Table of Contents
Advertisement
224
12. Check the Enable checkbox in the grid section if you would like the trend to display a grid,
and then configure the X and Y axis of the grid from the scroll boxes.
13. In the channel section, select the channel to configure from the drop-down menu, and then
select the pen properties for that channel. Next, select the value at which the pen will be at
the bottom of the trend (zero) and the span of the trend. Finally, check the Enable checkbox
if you would like the time and date to be displayed on the OIT then select the format in which
you'd like the time and date displayed.
14. Click the Shape tab to configure a background shape, if any.
15. Click the Profile tab if you'd like to position your trend using the properties dialog using the
X,Y position instead of dragging and placing it in the work area.
16. Click OK. The Trend appears on EasyBuilder's work area. Move the trend to place it on the
display. If you'd like to reconfigure any of its properties, double click on the trend to display
the Trend Display Object's Properties Dialog.
History Data Display Part
The History Data Display Part is used to display Historical data in a tabular format. Historical data is collected and
logged by the Data Sample object. Up to eight channels of data can be displayed.
1010-1007, Rev 05
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual
Advertisement
Table of Contents
