Table of Contents
Advertisement
214
4. Click on the Outline tab to display the outline form.
5. In the attribute section, select how the Bar Graph is to operate.
Function
Option
Description
Normal
The bar starts at one end of the object, and moves to the other end.
Type
The bar starts at some non-zero point defined by the Origin, and moves through the origin as the
Offset
value changes.
Zero
The PLC Register values corresponding to an unfilled bargraph.
Origin
The starting point of the bar when the Type is set to Offset.
Up
The bargraph starts at the bottom of the object, and moves up as it fills.
Down
The bargraph starts at the top of the object, and moves down as it fills.
Direction
Right
The bargraph starts at the left of the object, and moves right as it fills.
Left
The bargraph starts at the right of the object, and moves left as it fills.
Span
The PLC Register values corresponding to a completely filled bargraph.
Bar Width
The percent of the object's width that the bar occupies.
Ratio (%)
1010-1007, Rev 05
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual
Advertisement
Table of Contents
