Table of Contents
Advertisement
222
8. Click the enable check box in the Hold section if you would like the data sample to be paused
as long as the specified bit is set. If enabled, specify the PLC address and device type.
9. Select either time based or trigger based sampling of data. Time based samples data at
pre-set intervals of time. Trigger-based samples data when a specified bit undergoes a
specified change. If time-based, specify the sampling time interval (in seconds). If
trigger-based, specify Device type, PLC address and PLC name.
10. Check the auto stop check box if you would like the data sampling to automatically stop
when the number of records in Max data records has been reached. Otherwise, the existing
logged data will be deleted and new data will be recorded.
11. Select the type of memory to which you would like to save the data files, and then specify the
filename under which the data will be saved.
12. Click OK.
13. Follow steps 1-12 to create additional data sampling objects.
14. Click Exit to exit the data sampling object.
To create a Trend Display Object
1. From the Objects menu, click Trend Display. Or click the Trend Display icon in the Part2
toolbar. The New Trend Display Object dialog box appears.
2. In the Data Log Object Index, select the data sampling object whose data is to be trended
from the drop down menu.
3. For Display Mode, select whether the data showing will be historical data or data in real time.
1010-1007, Rev 05
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual
Advertisement
Table of Contents
