The Nu Meric In Put Ob Ject - Maple Systems Silver Plus Series Installation And Operation Manual

Rep re senting Data with Graph ics Ob jects
10. Click the Font tab to configure the font.
11. Select your Font from the drop down menu. Enter the color that you want for the digits
displayed in the color: box and then select the font size.
12. Enter how you want the digits to be positioned in the Align: box. The choices are:
• Right Adjust - aligns the number to the right margin of the part.
• Left Adjust - aligns the number to the left margin of the part.
• Leading Zero - inserts leading zeroes
13. Click OK. The Numeric Data Object form closes and the main screen of EasyBuilder appears
with the cursor tied to a rectangular outline of the part you just created at the upper left corner
of the screen. Move the part to the desired location on the window.
14. Once the part is placed onto the window, you can modify the attributes by double-clicking on
the part to display the Numeric Data Object's Attribute dialog box.

The Nu meric In put Ob ject

The Numeric Input Object is used to read and write numeric values to a PLC register. The object continuously reads
the PLC register and displays the corresponding value in the format specified. The PLC register can be a 16-bit or
32-bit word. By using the keypad, the operator can enter a new value.
Format Options
Low Limit
16-bit BCD
High Limit
Low Limit
32-bit BCD
High Limit
Low Limit
16-bit Hex
High Limit
Low Limit
32-bit Hex
High Limit
Low Limit
16-bit
Binary
High Limit
Low Limit
32-bit
Binary
High Limit
Low Limit
16-bit
Unsigned
High Limit
Low Limit
16-bit
Signed
High Limit
Low Limit
32-bit
Unsigned
High Limit
Low Limit
32-bit
Signed
High Limit
Low Limit
32-bit Float
High Limit
Range
0
65,535
0
4,294,967,295
0
65,535
0
4,294,967,295
0
65,535
0
4,294,967,295
0
65535
-32,768
32,768
0
4,294,967,295
-2,147,483,64
7
+2,147,483,64
7
-9999999999.
9999999999
+9999999999.
9999999999
187
1010-1007, Rev 05