Table of Contents
Advertisement
Bar Graphs, Me ters and Trends
3. Description: Enter a name for the object. This isn't necessary, but will help in later
identification of the object.
4. Max data records: Set the maximum number of records to log.
5. Select the Device type from the drop down menu, and then specify the PLC name and
address. Click Data Format... to set configure the format of each logged item. The Data
Format dialog appears. Click New... to call the configuration dialog.
6. Enter a Description for the data format and then select the Data type. Click OK to return to
the Data configuration dialog and then Exit to return to the Data Sampling dialog.
7. Click the enable check box in the Clear address section if you would like the data sample to
be cleared when the bit is momentarily set. If enabled, specify the PLC address and device
type.
221
1010-1007, Rev 05
Advertisement
Table of Contents
