Maple Systems Silver Plus Series Installation And Operation Manual page 227

Cre ating Your First Project
4. In channel no., select the number of pens tracking data. This number should be less than or
equal to the number of items configured in the selected data log index.
5. Select the name of the PLC to read/write to from the drop down menu.
6. Check the Enable checkbox in the Hold Control section if you'd like the trend to pause when
a specified bit is set, and then configure the PLC address and device type.
7. Click the Enable checkbox in the Watch line section if you'd like to place a watchline on the
trend that places a line at a specific register value, and then configure the PLC address and
device type.
8. Configure the History control section if the Display mode is set to history.
9. Click on the Trend tab to display the Trend form.
10. Enter a description for the trend. This is not necessary, but will help in identification later.
11. Select the frame color and the background color for the trend from the drop down menus.
223
1010-1007, Rev 05