Using EZware-5000
67
When the file is saved, the RCP file can be transferred directly to the OIT, via memory module (USB or
CompactFlash) or Project Manager.
Transfer Settings
Download
Sends a compiled project file stored on the computer to the OIT.
Up load
Receives a compiled project file from the OIT to be stored on the computer.
For more information about printing, see the Systems Configuration Settings/Printer tab section later in this chapter.
Simulation Settings
On-line Sim u la tion
Opens a compiled project (*.xob) in on-line simulator mode.
Off-line Simulation
Opens a compiled project (*.xob) in off-line simulator mode.
1010-1007, Rev 05