Maple Systems Silver Plus Series Installation And Operation Manual page 50

46
8. Check Use shape, then click Shape library. The Shape Library dialog box appears.
9. Click Select Lib... The Open dialog box appears.
10. Select arrow1.plb from the list of shape libraries. Then click Open.
11. Click arrow1 in the Shape library box.
12. Scroll through the selections to selection 3. Click the shape, then click OK. The shape will
appear in the Shape tab.
13. Click OK.
14. On the main screen of EasyBuilder, you will see a white square outline that is attached to your
cursor in the work area. This represents the increment key just created. Click to place the
increment key on Window #11.
15. Use the blue handles surrounding the key to drag the increment key to the desired size and
then place to the left of and below the numeric object.
To create a decrement key on Window#11
1. We are going to create the decrement key by copying the increment key and then making
changes to the attributes.
2. Click the increment key to highlight it.
3. From the Edit menu, click Copy.
1010-1007, Rev 05
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual