Table of Contents
Advertisement
OMI Operations Manual: OMI6900 Series
Driver Installation
Your OMI6800B series comes with all necessary drivers pre-installed. As such, driver installation is not normally
needed. However, there may be times when a driver requires re-installation. Use the Support DVD that came with
your unit to install all non-Windows Operating System Drivers. If you no longer have your Support DVD, visit the
Support Center of the Maple Systems website for driver download.
Equipment required:
•
OMI6000 Support DVD
•
USB External DVD drive
Instructions:
•
Plug in the USB external DVD drive into one of the USB ports.
•
Load the support DVD into the external drive.
•
Access the OMI6000 support DVD and open the folder corresponding to the driver you want to install /
reinstall.
•
Double-click the application (setup.exe) file to begin driver installation.
•
Follow the instructional prompts on the screen.
•
We recommend that you restart your computer when prompted, and after completion of all driver
installations.
Windows Operating System Reinstallation
In the unlikely event of a system failure requiring reinstallation of the Windows Operating System, use the OS
Recovery DVD (enclosed with Non-Embedded Operating Systems only) to reinstall Windows as it arrived to you
from Maple Systems. You will need to re-activate Windows using the Product Key located on the rear panel of your
unit, adjacent to the product label.
In the event that you wish to update your Windows Operating System (Non-Embedded Operating Systems only),
simply connect the OMI6900 Series unit to the Internet and run the Windows Update utility.
Embedded Operating Systems do not come with an OS Recovery DVD. In the extremely unlikely event the
Windows OS needs to be reinstalled, contact your Maple Systems Sales Engineer for instructions.
OMI Operations Manual: OMI6900 Series
27
27
Advertisement
Table of Contents
