Maple Systems Silver Plus Series Installation And Operation Manual page 209

Cre ating Your First Project
• If you'd like reference lines on the plot, check the Reference line checkboxes and specify the
position.
4. Select the Shape tab:
•
•
• In the Shape section, , check the Use shape checkbox and then click the Shape library...button to
select a background shape from the shape library. Check the Inner checkbox to use the interior
portion of the selected shape and select the color. Check the Frame checkbox to use the frame of
the shape and select the color.
• In the Picture section, select the Use picture checkbox and then click the Picture library... button
to select a background picture. Click the Set to original dimensions checkbox to always set the
picture to its original size.
• Use the preview section to preview a part's appearance in its selected state.
5. Click OK to save settings.
The next chapter shows how to construct a keypad for editing PLC data registers.
205
1010-1007, Rev 05