208
To create a Function Key Object
1. From the Objects menu, click Button-Function Key. Or click the Function Key icon in the
Part1 toolbar. The New Function Key Object dialog box appears.
2. Use the Description: box to enter a title for the Function Key part. A description is not
necessary but does help you identify the purpose of the part.
3. In the ASCII mode section, there are four control key options. Control keys are used during
data entry to perform a specific function.
Function
Description
Configures the Function Key as an Enter key. When pressed, it will write the alphanumeric characters
[ENTER]
entered into a Numeric Input Object or ASCII Input Object to the target PLC register.
1010-1007, Rev 05
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual