Transferring Projects And Data From Usb/Compactflash - Maple Systems Silver Plus Series Installation And Operation Manual

OIT Lo cal Setup
3. Click on the Version tab to display the current firmware information.

Transferring Projects and Data from USB/CompactFlash

When a USB or Compact Flash device is inserted into the Silver Plus Series OIT, a dialog is displayed. The same
dialog is displayed for transferring projects or data.
Download Project
Upload Project
Restart Project and exit
Cancel
Restart after download/upload
Time Remaining
Data is placed on the USB or CF device by EasyBuilder or Project Manager.
Transfer data from the USB/CF to the OIT
Transfer data from the OIT to the USB/CF
Close the dialog and restart the OIT
Close the dialog without transferring
When checked, the OIT will restart after the transfer
The dialog will automatically close after 10 seconds if no selection is
made; shows the time remaining
23
1010-1007, Rev 05