Maple Systems Silver Plus Series Installation And Operation Manual page 220

216
To create a Meter Display Object
1. From the Objects menu, click Meter Display. Or click the Meter Display icon in the Part2
toolbar. The New Display Meter Object dialog box appears.
2. Use the Description: box to enter a title for the Meter Display part. A description is not
necessary but does help you identify the purpose of the part.
3. In the Read address frame, select the Device type from the drop down menu, and then specify
the PLC register address. Select the data format.
4. Click the Outline tab to display the Outline form. This is where you will configure all of the
attributes of your meter.
1010-1007, Rev 05
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual