Maple Systems Silver Plus Series Installation And Operation Manual page 123

Cre ating Win dows
To Access the common window
1. From the Window menu, select Open Window. The Open Window dialog box appears.
2. Highlight Window #4, Common Window and click Settings. The Window Setting dialog
box appears.
3. As you can see, some of the parameters for a common window are disabled and cannot be
changed. Window #4 is always reserved for the common Window. Although the
Background settings are active, none of these settings affects the operation of the common
window.
4. Press OK. The Open Window dialog box reappears with the Common Window selected.
5. If you wish to open the common window, click Open. Otherwise, click Close to return to
the main screen of EasyBuilder.
Dis play ing the com mon win dow above/be low the base screen
This setting resolves the conflict that can occur if a graphics object on the common window occupies the same space
on the OIT display as a graphics object on a base screen. Using the Above base screen attribute forces the graphics
object on the common window to cover the base window graphics object. Using Below base screen has the
opposite effect.
119
1010-1007, Rev 05