Maple Systems Silver Plus Series Installation And Operation Manual page 214

210
Tab
General
Numeric Format
4. Create an ASCII Input Object with the following parameters:
Tab
General
5. Create two text boxes; one to identify the Numeric Input register, and one to label the ASCII
Input register.
Editing data registers using a keypad
1. Save and compile the new project, then test the operation of the keypad by either running in
Simulation mode or by downloading the project to the OIT.
2. The following screen will appear:
3. Change the value of the Numeric Input register. Touch the Numeric Input Object to
activate the edit mode. The keypad will pop up and the 0 digit will start to blink.
1010-1007, Rev 05
Frame Parameter
Description
PLC Name:
Read Address Device Type:
Address:
Window No
Keyboard
Popup position
Display Data Format
Number of Digits Left of Decimal Pt
For more information on how to use the Numeric Input Object, consult Chapter 8
"Representing Data with Graphics Objects".
Frame Parameter
Description
PLC Name:
Device Type
Read Address
Address:
No. of words
Window No.
Keyboard
Popup position
For more information on how to use the ASCII Input Extend Object, consult Chapter 8
"Representing Data with Graphics Objects".
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual
Value
Numeric Input Object
Local OIT
LW
0
54:ASCII Middle
Select middle option in the right-hand row
16-bit signed
5
Value
ASCII Input Object
Local OIT
LW
1
12
54. ASCII Middle
Select middle option in the right-hand row