Maple Systems Silver Plus Series Installation And Operation Manual page 179

Rep re senting Data with Graph ics Ob jects
To create a Toggle Switch Object
1. From the Objects menu, click Button-Toggle Switch. Or click the Toggle Switch icon in
the Part1 toolbar. The New Toggle Switch Object dialog box appears.
2. Use the Description: box to enter a title for the Toggle Switch part. A description is not
necessary but does help you identify the purpose of the part.
3. In the Read address frame, select the PLC coil or HMI internal memory address that the part
continuously reads.
4. In the Write address frame, specify the Device type: from the drop down menu and then
select the PLC coil or HMI internal memory address that the part writes to when pressed.
5. In the Attribute frame, select how you want the Toggle Switch object to operate:
Switch Style
Set ON
Set OFF
Toggle
Description
Sets a PLC coil when pressed.
Clears a PLC coil when pressed.
Alternates between setting and clearing a PLC coil.
175
1010-1007, Rev 05