Maple Systems Silver Plus Series Installation And Operation Manual page 92

88
2. From the Edit menu, click Align, then Horiz. Center or click the appropriate icon from the
Manager toolbar.
3. From the Edit menu, click Undo to put the objects back in their original position.
Using the align vertical center
1. Select the objects you wish to align. For this example, select the three rectangle objects of
Window_12.
2. From the Edit menu, click Align, then Vert. Center or click the appropriate icon from the
Manager toolbar.
3. From the Edit menu, click Undo to put the objects back in their original position.
1010-1007, Rev 05
Centering is based on the horizontal center of the left-most object.
command
Centering is based on the vertical center of the top-most object.
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual