Maple Systems Silver Plus Series Installation And Operation Manual page 24

20
10. Configure your password settings.
Local Password
Upload Password
Download Password
Reserved Password
11. The new password must be entered, and then entered again to confirm. As the password is
entered into the confirm field, an indicator will show if the two passwords match.
12. Click on the History tab to display the History dialog. This is where data stored in the OIT
can be cleared.
1010-1007, Rev 05
The password required to enter local setup.
The password required to upload data from the OIT to a PC or memory module.
The password required to download data to the OIT from a PC or memory module.
Not used at this time.
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual