Maple Systems Silver Plus Series Installation And Operation Manual page 195

Rep re senting Data with Graph ics Ob jects
10. Click the Security tab to enable security for the numeric input object, if needed. Interlock
frame, check the Enable box if the PLC is to enable or disable the object. The object will be
enabled when the specified bit is set or clear, depending on whether the "Enable when Bit is
ON" or "Enable when Bit is OFF" option is selected. To make the object invisible when
disabled (bit is clear), check the Hide When Disabled checkbox. In the remaining options,
select the PLC / Controller that controls the bit, and select the Device Type and the address. If
security is enabled, you have the option of selecting up to level 6 of security and selecting to
make the object invisible until the password has been entered.
11. Click the Shape tab to configure a shape or bitmap that is displayed behind the number.
12. Click on the Font tab to select a font.
13. Select the font you want from the Font: drop down menu. Select the desired font size and
color.
14. Enter the desired text positioning in the Align: box. The choices are:
• Right Adjust - aligns the number to the right margin of the part.
Low Limit
32-bit
Unsigned
High Limit
Low Limit
32-bit
Signed
High Limit
Low Limit
32-bit Float
High Limit
0
4,294,967,295
-2,147,483,647
+2,147,483,64
7
-9999999999.9
999999999
+9999999999.
9999999999
191
1010-1007, Rev 05