Maple Systems Silver Plus Series Installation And Operation Manual page 79

Using EZware-5000
3. Click Open. Window_12 appears in the work area of EasyBuilder.
Dis play Options
Before we begin describing some of the commands that can be used to edit graphics objects, there are a few
commands that apply to the general work area of EasyBuilder.
EasyBuilder provides a Window Tree that can be used to easily maneuver between windows of a project. It also
allows you to select any object that is on the window that is currently displayed.
To display/hide the Window Tree
1. On the View Menu, click Window Tree
Using the Window Tree to display window screens
1. The Window Tree combines into a single tree a list of all of the windows in a project, and all
of the objects on each window. Using the 5056DEMO.MPT project, the following should be
seen :
2. Notice that the tree displays the title for each window next to the window number. This
makes it easy to determine windows have been created for a project. The asterisk (*) next to
Window #10 indicates that this window is currently open.
3. To display an open window, click on the window number in the Window Tree. To display a
window that is not yet open, double-click on the window number. This will automatically
open the window and display it.
75
1010-1007, Rev 05