Table of Contents
Advertisement
Introduction
Welcome to the Maple Systems' Silver Plus Series Operator Interface Terminals (OITs). Using graphic OITs has never been
easier. This powerful family of graphics operator interface terminals connects to programmable logic controllers (PLCs) to
provide the human-machine interface in industrial applications. The Silver Plus Series has several features not found in other
graphic OITs. This manual explains the operation of the Silver Plus Series OITs and how to implement the many available
features using the EZware-5000 Configuration Software.
EZware-5000 Sup port
OIT Mod els Sup ported
For the latest list of Silver Plus Series Models supported by EZware-5000, please visit our website at
www.maplesystems.com.
PLCs Supported
For the latest list of PLCs and controllers supported by the Silver Plus Series OITs, please visit our website.
About Your Doc u men ta tion
Maple Systems provides many resources to allow you to get the most out of your Silver Plus Series OIT.
Silver Plus Series Operation Manual (shipped with EZware-5000 as a PDF file) - describes installation, general
operation and features of the Silver Plus Series using EZware-5000 configuration software.
Controller Information Sheets - important information specific to each supported protocol.
EZware-5000 On-line Help - covers the operation of EZware-5000. Always available by clicking HelpTopics from
the Help menu in EasyBuilder, or press F1 from any dialog.
For more information about these and other training sources, visit the Maple Systems website.
Con ven tions
When using EZware-5000, there are usually several ways to perform a task. For example, if you want to copy a graphics
object, you can:
Click the Copy command on the Edit menu.
Click the Copy button on the Standard toolbar.
Press the CTRL + C keys on your com puter.
Introduction - Welcome
1
1010-1007, Rev 05
Advertisement
Table of Contents
