Maple Systems Silver Plus Series Installation And Operation Manual page 205

Cre ating Your First Project
3. Double click the part. The Animation Object's Properties dialog box appears:.
4. Use the Description: box to enter a title for the Animation part. A description is not necessary
but does help you identify the purpose of the part.
5. In the Read address frame, select the device type from the drop down menu and then indicate
the starting PLC coil address that the part reads from. Select the data format.
6. In the No. of states: box, select the total number of states to be displayed.
7. Refer to the Bit Lamp Object section for information on using the Shape tab.
8. Refer to the Bit Lamp Object section for information on using the Label tab.
9. Click on the Profile tab. The Profile dialog box appears.
10. The Position settings refer to the overall location of the Animation Object on the window
screen.
11. The Size settings refer to the overall size of the Animation Object.
12. The Shape rectangle size settings refer to the size of the shape or picture that you are using.
13. The Trajectory setting allows you to manipulate the position of each point along the path of
movement. Click on the points pull-down box to select the point you wish to change, then
edit the X and Y positions.
14. Click OK. The Animation Object's Properties dialog form closes and the main screen of
EasyBuilder appears with the Animation part you just created on the screen. The shape you
selected is located at the first position on the path.
15. Once the part is placed onto the window, you can adjust the attributes by double-clicking on
the part to enter the Animation Object's Properties dialog box.
201
1010-1007, Rev 05