Maple Systems Silver Plus Series Installation And Operation Manual page 193

Rep re senting Data with Graph ics Ob jects
5. Click the Numeric Format tab..
6. In the Display attribute box, select the format type you wish to use. The options are:
Format
16-bit BCD
32-bit BCD
16-bit Hex
32-bit Hex
16-bit Binary
32-bit Binary
16-bit Unsigned
16-bit Signed
32-bit Unsigned
32-bit Signed
32-bit Float
6. Check the Mask box to hide the value with asterisks.
7. In the Number of Digits section, select how the data is to be represented.
Format
16-bit BCD
Range
0 to 32,767 BCD
0 to 65,536 BCD
0 to FFFF
0 to FFFFFFFF
00... to 11... (16 bits)
00... to 11... (32 bits)
0 to 65,537
-32,768 to +32,768
0 to 4,294,967,295
-2,147,483,647 to +2,147,483,647
-9999999999.9999999999 to
9999999999.9999999999
Options Range
Left of Dec. Pt. 1 to 11
Right of Dec. Pt. 0 to 11
Description
16-bit Binary-Coded Decimal
32-bit Binary-Coded Decimal
16-bit Hexadecimal
32-bit Hexadecimal
16 Binary Digits
32 Binary Digits
16-bit Unsigned Integer
16-bit Signed Integer
32-bit Unsigned Integer
32-bit Signed Integer
IEEE754 Single Precision
Description
Digits to display to the left of the Decimal Point
Digits to display to the right of the Decimal Point
189
1010-1007, Rev 05