Table of Contents
Advertisement
188
To create a Numeric Input Object
1. From the Objects menu, click Numeric/ASCII-Numeric Input. Or click the Numeric
Input icon in the Part1 toolbar. The New Numeric Input Object dialog box appears.
2. Use the Description: box to enter a title for the Numeric Input part. A description is not
necessary but does help you identify the purpose of the part.
3. In the Read address frame, select the device type from the drop down menu and then specify
the PLC register address that the part continuously reads and writes to. Select the data
format.
4. In the Keyboard frame, select window that contains the keypad you will be using for data
entry from the drop-down menu, and then select the spot on the nine-dot matrix where you'd
like the keypad to popup relative to the OIT display.
1010-1007, Rev 05
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual
Advertisement
Table of Contents
