Maple Systems Silver Plus Series Installation And Operation Manual page 245

Cre ating Your First Project
To create a backup part:
1. From the Object menu, select Backup, or click the Backup icon on the Object2 toolbar. The
New Backup dialog appears.
2. Use the Description: box to enter a title for the MultiState Switch part. A description is not
necessary but does help you identify the purpose of the part.
Source
Data Sampling Object Index
Backup Position
Range Start
Range Within
Attribute Mode
Attribute Trigger Mode
Trigger Address
3. Click the Security tab and configure security settings, if needed.
4. Click the Shape tab to configure background shape, if needed.
5. Click the Label tab to apply a text label, if needed.
6. Click OK.
Select which dataset to back up. Data Log is available only if a Data Sample has
been set up.
Select the Data Sample set to back up. Available only when the Source is set to
Data Log.
Select which USB device to back the data up to. Note: USB1 is the device that
was installed first; USB2 is the device that was installed last.
Select whether to start with Today's data or Yesterday's data.
Select the number of days' worth of data to back up.
Touch Trigger causes the backup to execute when the object is touched.
External Trigger causes the backup to execute when the specified bit transitions.
Specify how the bit must change to trigger the backup. Available only when
Attribute Mode is set to External Trigger.
Specify the bit address with which to trigger the backup. Available only when
Attribute Mode is set to External Trigger.
241
1010-1007, Rev 05