Maple Systems Silver Plus Series Installation And Operation Manual page 120

116
To call a popup window using the Direct Window Object
1. From the Objects menu, select Direct Window. The New Direct Window Object dialog box
appears.
2. Select the PLC address according to Device type from the drop down menu and then enter the
address .
3. Select the Window No. you want to call from the drop down menu under the Attribute
heading.
4. Click OK to return to the main screen of EasyBuilder. The mouse cursor will have a square
object that represents the size of the popup window.
5. Place the Direct Window object where you want the popup window to appear.
6. You can resize the object after you have placed it by clicking on the object and dragging on
the sizing handles.
1010-1007, Rev 05
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual