Maple Systems Silver Plus Series Installation And Operation Manual page 174

170
To create a Bit Lamp Object
1. From the Objects menu, click Lamp - Bit Lamp. Or click the Bit Lamp icon in the Part1
toolbar. The New Bit Lamp Object dialog box appears.
2. Use the Description: box to enter a title for the Bit Lamp part. A description is not necessary
but does help you identify the purpose of the part.
3. In the Read address frame, select the PLC Name and Device type from the drop down menu,
and specify the PLC coil or HMI internal memory address.
4. In the Blinking frame, select how you want the Bit Lamp object to operate:
Mode
None
Alternating Image on State 0
Alternating Image on State 1
Blinking on State 0
Blinking on State 1
1010-1007, Rev 05
Description
Displays State 0 object when clear; displays State 1 object when set.
Alternates between state 0 and 1 object when clear; displays the state 1 object when set.
Displays the state 1 object when clear; alternates between state 0 and 1 when set.
Displays state 0 object when clear; blinks state 0 object when set
Displays state 0 object when clear; blinks state 1 object when set
Sil ver Plus Se ries In stal la tion & Op er a tion Man ual