Maple Systems Silver Plus Series Installation And Operation Manual page 93

Using EZware-5000
Making Ob jects the Same Size
This feature is handy if you want to quickly make two or more objects the same size. Objects are sized to the size of
the last-selected object. The last-selected object will have "handles" of a different color than the other selected
objects. This is most often used when you are trying to overlap objects that must be the same size. To better
illustrate, refer to the left side of Window_12 of the sample project:
The make same width
1. Select the objects you wish to make the same width. For this example, select the left and
center rectangle objects of Window_12
2. From the Edit menu, click Make Same Size, then Width or click the appropriate icon from
the Manager toolbar.
The make same height
1. Select the objects you wish to make the same height. For this example, select the left and
center rectangle objects of Window_12
2. From the Edit menu, click Make Same Size, then Height or click the appropriate icon from
the Manager toolbar.
command
command
89
1010-1007, Rev 05