Maple Systems Silver Plus Series Installation And Operation Manual page 221

Bar Graphs, Me ters and Trends
5. In the Degree section, you can select the range of your meter, where the range is 0 to 360.
The start degree, 0 is at 12:00. Below are four examples of start and end degrees for different
meters:
Note that meters can have any start and end degree between 0 and 360.
6. The Background section allows you to select background options for the meter. The
following illustrations illustrates how your meter will appear with different options checked:
7. The Tick Marks section allows you to configure the length, scale and sub-scale of the tick
marks.
8. In the Pointer section, select arm style, color, length, and width.
9. The Pinpoint section allows you to adjust the style and size of the pinpoint. See the
illustration above to see the pinpoint.
217
1010-1007, Rev 05